Menu

CAPTO PPE Inspection

CAPTO PPE INSPECTION

The CAPTO should have a periodic inspection performed by a competent person at least once every 12 months, after any exceptional event(s), or if there is any doubt about the condition of the product. For each inspection, CMC recommends the Periodic PPE Inspection Form be completed, signed, and archived for the life of the product. In case of retirement, be sure to render the device useless before disposal to prevent further use.

Provided below are the CAPTO PPE inspection documents including the CAPTO Periodic PPE Inspection Procedure and Periodic PPE Inspection Form. These documents offer guidance for performing a detailed inspection of both the 11 mm CAPTO and 13 mm CAPTO, however, any mention of the CE mark or CE requirements is specific to the 11 mm CAPTO. Visit the CAPTO product page for the latest version of the User Manual for reference during inspection.

The materials provided here are not exhaustive. Inspection by a competent person is required. See the PPE homepage for more information on being a “competent person”. By performing a periodic inspection and signing periodic inspection forms, you are declaring yourself as a competent person and assuming responsibility for the implementation of the inspection processes and proper disposition of the PPE.

PRODUCT INFORMATION

11 MM CAPTO, ITEM #336011

13 MM CAPTO, ITEM #336013

RESOURCES FOR PPE INSPECTION

CAPTO PPE INSPECTION PROCEDURE

CAPTO PPE INSPECTION FORM

Scroll to top
CMC